Gas Analysis
Instruments that analyze gases.
Instruments that analyze gases.
Features:
- Dual wavelength infra-red sensor technology
- Ranges 0-6%, 0-10% or 0-15%
- Scalable analog and digital output
- Fast response, 0.5 sec
- Resolution down to 1ppm
The CA-10 carbon dioxide analyzer is a fast-responding CO2 analyzer with a wide measurement range (up to 0-15%) combined with high resolution (1 ppm at atmospheric levels). It is suitable for any CO2 analysis application where reliability, versatility and low drift are required.Features:
- Robust, low noise fuel cell technology
- Range 0-100% O2, resolution .0001%
- Scalable analog or digital outputs
- Barometric pressure compensation
The FC-10 oxygen analyzer is the instrument of choice for single-channel high display resolution (better than 0.001%) oxygen measurements. This oxygen analyzer's low noise and low drift make it a pleasure to use in demanding applications such as respirometry, metallurgy and tissue culture.Features:
- Compact respirometry system in a box
- Generates mass flow rates from 10ml/minute to 1500ml/minute
- Serial and analog outputs, analog inputs
- Analog and digital (RS-232) outputs
- On board data logging
The FoxBox is a field portable integrated oxygen and carbon dioxide analysis instrument that includes a variable pump and mass flow meter (range 20 - 2000 ml/minute). All of these instruments are integrated into a small (10"x10.5"x7"), light (8 lbs.), compact, hermetically sealed, dustproof, waterproof field rugged case. The Foxbox is also avaliable as an oxygen only configuration for applications that do not require carbon dioxide measurements.Features:
- Wide range 0-10%, high resolution 0.0001%
- Dual wavelength infrared technology
- Barometric pressure compensated
- Analog and digital (RS-232) outputs
- Not sensitive to flow rate changes
- Rugged, light, low power consumption
The MA-10 methane analyzer is a fast-responding CH4 analyzer with a wide measurement range (0-10%) combined with high resolution. It is suitable for any methane analysis application where reliability, versatility and low drift are required. Features:
- Differential and dual-absolute
- High resolution (0.0001%)
- Very low drift and noise
- One click calibration, no external software required
The Oxzilla II differential oxygen analyzer offers the highest resolution (1ppm), lowest noise (<8ppm pk-pk), and lowest drift (<0.02%/24hr) available in any oxygen analyzer. The Oxzilla II is suitable for the most demanding oxygen measurements applications such as Drosophila (fruit fly) metabolic measurement and atmospheric monitoring.Features:
- Standards compliant paramagnetic sensor technology
- Fast response
- Scalable analog and serial output
- Range 0-100%, resolution .0001%
- Barometric pressure compensation
- Ideal for H2S gas mixtures
The PA-10 oxygen analyzer is the instrument of choice for single channel full range (0-100%), fast response (0.2 sec), high resolution oxygen measurements. This oxygen analyzer is ideal for applications such as medical gas testing that require paramagnetic sensors for standards compliance.Features:
- High Resolution Flow through design
- Measures Relative Humidity, Dew Point, Water Vapor Density or Water Vapor Pressure
- Easy to Use and Easy Data Acquisition
- Resistant to Contamination
The RH-300 water vapor analyzer is a high resolution (0.001% relative humidity), wide range (0-100% RH non-condensing) flow-through analyzer that can display and output in units of relative humidity, dew point, water vapor pressure, and water vapor density. The RH-300 is ideal for determining water loss rates and measuring water vapor partial pressure for gas sample dilution corrections.
